Instructions
About this item
Water Safety Personal Alarm: With 433 MHz remote control via direct with Sirine, receive real-time alarm notifications on the monitor water detector remotely and stop causing accidents in time. The Water Safety Personal Alarm host and wireless water sensors have been established to prevent drownings such as infants, adults, pets or anyone with an inability to swim or contact with water, oil, diesel or any form of liquid.
Loud alarm host: 120dB high volume horn allows you to know the triggering of any sensor in a timely manner through sound, even within a slightly distant range; The water detector kits with a wireless range of about 300 ft (90m) in an open area. Remember This is an ALARM not a LIFE SAVER.
Safety first
​1- Connect the Sirine with the power cable and to the power outlet (110v)
2- Unscrew the water detectors to remove the plastic around AA battery.
3- Places the batteries properly back into the electronic device.
4- Press the button to be sure battery work and is placed properly.
5- Place the electronic device into the poach.
6- Make sure to place the Sirine 4 foot above the water level.
(From 4 ft up anywhere outdoor NO MORE THAN 300ft DISTANCE FROM THE WATER).
7- Strap the belt around the waist with the water alarm in the back.
8- In the Siren key Control Remote to activate this
(Press 2 times on the unlock icon until you hear the bib) and (Press 2 times the locked icon
until you hear the bib) it will bib each time you press it.
9- When the Siren alarm is on (press one time the unlock icon) to disactivated.
10-Read the instruction on the (8) to activate this again.
11-Make sure you have rested your power outlet in case you can't hear the siren working when setting this one.